Thoughtful Thursday Halloween Decor

Featured

I wanted to share with you some fun Halloween decorations that you can easily make. I love vintage images and had purchased these at a show I was at, but you can find tons online. Please read the instructions first before beginning so you have an idea of what you will be doing. The supply list is at the bottom of this post.

Instructions

  1. Decide how you want to hang your plaques. Based on the type of plaque you have you may want to attach a picture hook to the back or you can drill 2 small holes in the top corners and sand them if needed.
  2. Apply a good coat of gesso to each plaque, front and back.
  3. Find images online and print them on cardstock. Cut them out and set aside.
  4. Paint each plaque in a coordinating color. Let dry overnight. Sand edges for a worn look and wipe off dust.
  5. Steps 6, 7 and 8 are the instructions for hanging with wire. If you used a picture hook in the back of your plaque, skip steps 6, 7 and 8. Another alternative to the wire is to use a piece of fabric or yarn which you would also skip these 3 next steps.
  6. Cut 11 inches of the jewelry wire. From the back of the plaque, put one end through the hole, coming out of the front of the plaque and coil the end with the pliers to knot it.
  7. Slightly off center at the top of the wire, wrap the wire around a pencil, 3 times and slide the pencil out.
  8. Feed the other end of the wire through the second hole from the back of the plaque, coming out in the front. Cut off any excess wire and coil the end as in step 6.
  9. Glue your images on to the plaque with Aleene’s Tacky Glue.
  10. Add a piece of torn autumn fabric to the top of the wire and that’s it!

Supplies:

  • 3 Vintage Halloween Images
  • 3 Wood Plaques fitting your images
  • Gesso
  • Acrylic Paint: Black, Orange, Red or any of your choice
  • Black Copper Jewelry Wire
  • Drill for hanging
  • Picture hanging hook/bracket (optional)
  • Needle nose jewelry pliers
  • Harvest Fabric scraps
  • Aleeneโ€™s Tacky Glue

Hope you enjoyed this tutorial!

Thanks for stopping by!!

๐ŸŽƒ Share the Spooky ๐ŸŽƒ

Spooky Halloween Decoration

I found this wooden cut out in the Art and Craft store and thought it would be fun to make it into a Halloween Decoration. It’s fairly easy to make with minimal supplies and would be a great project to make with kids, supervised of course ๐Ÿ˜‰

Supplies:

  • Wooden “Spooky” cut out with hanging wire
  • Gesso
  • Folkart Crackle Medium
  • Acrylic Paint: Red, Black
  • Acrylic Paint Pens: Red, White
  • Stickles: Xmas Red
  • Inkssentials Glossy Accents
  • 2 Black glitter pumpkin bell ornaments

Instructions:

  1. Paint the wooden cut out with gesso. Let dry.
  2. Paint cut out with red acrylic paint. Let dry.
  3. Paint cut out with Folkart Crackle Medium. Let dry.
  4. Paint cut out with black acrylic paint. Note: While this layer dries, the paint will start to crack and you’ll see the red paint underneath show through. Make sure to let this completely dry before moving on.
  5. Using the white and red acrylic paint pens, outline the letters a little to make them stand out more. Note: If you don’t have the pens, you can also use a liner brush dipped in white and red acrylic paint to make the thin lines.
  6. Add drops of blood to the letters with the red Stickles. Let dry.
  7. Using the Glossy Accents, go over the Stickles blood drops. Once dry, this will give the droplets a 3D effect.
  8. Last, tie on your pumpkin ornaments to the ends where the wires are and that’s it!